If your shower isn’t giving off hot water, it may be time to call in a professional. A company like Rooter-Man can assess the damage and recommend a solution. In some cases, the problem may be a simple pressure-balancing valve. In other cases, it could be something as simple as a contaminated water supply pipe.

A professional Candu plumber in Thousand Oaks, CA, can help you figure out what’s going on with your shower and recommend the best course of action.

Fixing a defective pressure-balancing valve

If cold water is not coming out of your shower, you need to check the pressure-balancing valve in your shower. If it is faulty, replace it with a functioning one. If cold water still doesn’t come out, you may have a blockage in the cold-water pipe leading to the shower.

If you are not sure whether the valve is defective, try shaking the valve to see if it rattles. If the valve still doesn’t work, you can use a vinegar and water solution to break up any blockage. If you are still having trouble, you can replace the valve.

Reinstalling a faucet

If you’re having trouble getting cold water out of your shower, it may be due to a number of problems. If you’re unsure what the problem is, contact a professional plumber and determine the best course of action. Typically, a buildup of lime scale, which is formed by mineral deposits in hard water, will be the cause. A long-term solution may involve replacing the faucet’s pipe or installing a water softening system.

To replace the cartridge, you must first remove the old cartridge. This can be done with a cartridge puller, which you can purchase at a hardware store. Then, you need to line the valve body with silicone grease so that the new cartridge slides into the valve body smoothly. Once you’ve removed the old cartridge, replace the outer parts of the faucet, including the retainer clip.

Cleaning a contaminated water supply pipe

If you’re experiencing slow water flow from your shower, you should first check to see if there are any clogs in your pipes. You can start by flushing the P-traps that connect to the drains. After you’ve done that, you can check the rest of the pipes. Flushing cold water through the hot water pipes can also help.

Keeping your water heater yearly

If you notice that the water coming out of your shower isn’t hot enough, you need to have your water heater inspected and maintained. This can prevent you from needing to spend a lot of money on repairs and replacements. A Thousand Oaks Plumbing professional can tune up your water heater and look for water leaks and corrosion. They can also help you figure out what’s causing your cold shower water to come out.

A simple fix for this problem is to flush sediment out of the bottom of the tank. To do this, hook up a hose outside, open the drain valve, and flush the sediment out with a strong stream of water for half a minute. Care must be taken to avoid burning yourself while flushing out sediment, but this process is important for a longer-lasting heater. This should be repeated at least once every three months.

Other possible causes

In many cases, the issue is related to the pressure balancing valve, which regulates the ratio of hot and cold water that comes out of the showerhead. This valve is exposed to water throughout the day, and over time, it can become damaged or worn out. If this problem persists, you may want to contact a plumber for help.

In the most common cases, cold water does not come out of the shower because of a malfunctioning pressure-balancing valve, located inside the shower faucet. If this is the case, you may need to replace the valve. This task is simple enough, but it requires a small amount of patience.

Candu Plumbing & Rooter
22144 Eccles St, Canoga Park, CA 91304
(855) 522-2638
https://www.canduplumbing.com/

Categories: Plumbers